Change a Propane Tank
Forklifts powered by propane are common inside warehouse environments. These forklifts have a propane mount situated at the back of the operator. These tanks need to be replaced every so often since they have limited lifespans. Forklift drivers should use caution when handling propane tanks. Compressed gases are really hazardous, specially because the gas is flammable. Utilize caution when removing and replacing propane tank to prevent injury.
1 To change a propane tank, first stop the lift truck and leave the engine running, and turn the valve on the tank off. Let the lift truck run until the engine dies. This process burns off the gas in the transfer hose that connects the engine and the tank. Prior to taking the next steps, put on the correct safety equipment, like insulated gloves made of either neoprene or leather. It is really important for you to protect your skin from contact with the compressed gas, that is very cold.
2 Disconnect the hose from the tank and take the holding straps off to remove the tank. When you put in a new tank, tighten the nut to reconnect the holding straps and to reattach the hose at the valve of the tank.
3 You can check for leaks by applying soapy water to the valve and slightly opening it. Leaking gas would cause bubbles to foam around the value. If this occurs, check the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks around the valve area, and afterward do the leak checking procedure once more. Persistent leaks mean that the connecting hose and nut will have to be replaced. Nevertheless, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Finally, open the valve all the way to enable the gas to fill the connecting hose. Then you could start the forklift and resume operating.