In the majority of situations, most individuals spend quite a lot of money purchasing their lift truck. Therefore, it is very essential to take good care of it in order to protect your investment well into the long run. It is a good idea to know the procedures that are undertaken during the care and maintenance of this piece of equipment.
Among the best ways to tell how good the engine is running is by starting the lift truck up and listening closely to see how it runs. Like for instance, if there are any knocks or misses, the equipment is faulty and this must raise some issues. Additionally listen closely for any squealing sounds that come from the belts as these sounds will provide you with a lot of information.
Several of the main components needing attention during maintenance consist of the gauges, horn, safety warning devices, the lights and the overhead guard. Any burnt out light bulbs or faulty parts must be replaced as soon as they are noticed. It is also imperative to inspect the wiring.
The battery compartment terminals must be cleaned when the above components have been inspected thoroughly. If the terminals are not clean, be sure to clean them well. Each battery cell should be checked in order to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The transmission filter, fuel filters and the hydraulic filter must be regularly replaced. Prior to fitting them, be sure to write the date on the new filters by using a permanent marker to be able to keep track.
Once the oil change has been carried out and new filters have been fitted, visually check the drive axle from beneath the machine. Be certain to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Afterwards, check each and every other component of the machinery including the wheels. If any kind of fault or concern is detected, be certain to deal with it immediately in order to make certain the equipment is working at its safest and optimum levels.