The kind of vehicle normally found within factories, warehouses and different work sites where moving heavy materials from one location to another is required is referred to as a forklift. The mast is the mechanism located on the front of the forklift which hydraulically lifts and lowers the load. The "cat" is the protected area where the forklift operator sits.
Forklifts can carry loads which weigh between one to five tons. Some kinds can be utilized to raise shipping containers and loads that are a lot heavier.
The tires of a forklift must be inspected and maintained regularly. The types of tires on various forklifts vary based on factors like for instance load weights, ground surfaces and frequency of use. Each and every forklift operator must have access to replacement tires, a forklift jack and tire press.
Tire Maintenance Instructions
Carry out tire inspections regularly. Watch for indications of damage and wear to the tires. If the wear on the tire exceeds 40%, it has to be replaced.
When purchasing tires, make sure that you are buying the right type - solid, pneumatic or polyurethane.
When you have to replace the tires, the forklift jack should be positioned under the tire. You could easily change the tires if you raise the forklift high enough.
To remove the damaged tire, pull the tire from the rim utilizing the tire press. Install the new tire and properly secure it. If you are changing more than one tire and you have only one jack, lower the forklift, then reposition the jack at the next tire.
On-site tire repair can be performed by a repair company. If the tire is extremely big for both mobile and in-house tire presses, the damaged tire should be transported to a shop which has a stationary tire press.